Low carbon in the construction industry
Low carbon is a term applied to an economy, industry, product or activity to describe the relatively low amount of carbon dioxide generated by it over a specific time.
Carbon dioxide from vehicle exhausts, manufacturing, construction, heating and cooling etc, accumulates in the atmosphere contributing to the greenhouse effect and consequently climate change. It is for this reason that achieving a low-carbon economy has become an objective for many countries, regions, businesses and individuals.
Being low-carbon (or decarbonised) essentially requires reducing the direct use of fossil fuels – coal, gas and oil – and also, activities which rely indirectly on fossil fuels, such as cooking and washing, which usually require gas or electricity generated at power stations using fossil fuels (e.g coal and oil). A low fossil-fuel economy (LFFE) is also therefore a low-carbon economy.
Activities or buildings which emit relatively low amounts of carbon dioxide are said to have a low carbon footprint. This may be achieved by designs which focus on renewable energy technology, such as passive solar space/water heating, photovoltaics, triple glazing, high levels of insulation, energy-efficient condensing boilers, building design and orientation and so on. Their inclusion can help reduce a building’s operating costs – lower heating and cooling bills, reducing emissions and therefore lowering the carbon footprint.
Achieving this can also be aided by the materials used in constructing a building. For example, clay bricks tend to have a high embodied energy content. Large amounts of energy are required to make them e.g firing, which requires very high temperatures and is therefore energy intensive. This is why such materials are said to have a high embodied energy content. On the other hand, it can be argued that materials such as clay brick can offset their embodied energy content because they have been proven to last for centuries with minimal maintenance. Such whole-life considerations should be weighed-up when specifying materials of construction.
Building construction is considered to generate relatively high carbon emissions. Transitioning from a high- to a low-carbon construction sector can be difficult but may be achieved by strategies such as:
- Promoting good practice.
- Ensuring good quality workmanship on site.
- Reducing waste.
- Using low-embodied energy, local products and materials.
- Using recycled and recyclable products and materials.
- Designing for deconstruction.
- On-site energy generation and storage.
- Reducing the use of vehicles.
- High levels of insulation.
- Low infiltration rates.
- Low water and power-consuming appliances.
- Carbon capture and storage.
- Passive design techniques.
For more information see: Sustainability.
[edit] Related articles on Designing Buildings
- BREEAM.
- Carbon dioxide.
- Climate change Act.
- Code for sustainable homes.
- ECA backs Government plans for low-carbon heat.
- Energy Act.
- Energy Performance Certificates.
- Energy Related Products Regulations.
- Energy targets.
- Government Construction Strategy.
- Home Quality Mark.
- How much carbon are your buildings responsible for?
- Mean lean green.
- Routes to low carbon energy.
- Sustainability.
- Sustainable materials.
- Zero carbon homes.
- Zero carbon non-domestic buildings.
Featured articles and news
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Tackling the lack of knowledge or confidence in heat pumps
The CICV Green Home Festival part of the Edinburgh Fringe.
Home improvements swapped for green energy upgrades
As applications down since and desire to reduce bills up.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
The Use of Natural Insulation Materials in Retrofit
New paper from STBA with support from SDF.
National Retrofit Hub in partnership with InstallerSHOW.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.